Once you have the factory stereo removed you will need to undo one of the brackets. Make sure you attach the left bracket on the left side of the single din. The writing on the single din indicates the top side which should be above the stereo.

The bracket only uses 2 of the 4 screws from the factory head unit. You will need to purchase nuts to fit on these screws. Once you have both brackets mounted simply slip the radio into the single din and attach screws into the side of the radio to hold it in place. The screw hole in the side of the brackets should line up with at least one screw hole on the aftermarket stereo.

Once you have your head unit installed in the single din you can reattach the wires and bolt the factory brackets into place.

Reuse the bolts from the factory head unit to secure the single din. (Shown in picture 1 step 7)